1、主要用途與使用范圍

1. Main purpose and scope of use

用于在鋁型材槽內滾齒穿條，隔熱型材坯料開齒帶穿條，開齒機是提高隔熱條和鋁合金型材剪切的關鍵設備。通過高速運轉開齒刀將鋁合金型材嵌隔熱條的槽口部位進行開齒，使鋁型材大大提高剪切力。開齒刀（即開齒滾輪）上下調節（0-250mm），左右調節（6-125mm）。

Used for rolling teeth and threading strips in aluminum profile grooves, cutting teeth and threading strips on insulation profile blanks, the cutting machine is a key equipment for improving the cutting of insulation strips and aluminum alloy profiles. By high-speed operation of the toothed cutter, the slot of the aluminum alloy profile embedded in the insulation strip is toothed, greatly increasing the shear force of the aluminum profile. The toothed cutter (i.e. toothed roller) can be adjusted up and down (0-250mm), and left and right (6-125mm).

2、主要技術參數

2. Main technical parameters

電源：         220V            50HZ

Power supply: 220V 50HZ

總功率：         1.5KW

Total power: 1.5KW

總重量：        480㎏

Total weight: 480 kg

開齒刀規格：    Φ 105mm

Gear cutter specification: Φ 105mm

可加工型材端面：寬（260mm）x高（210mm）

Machinable profile end face: width (260mm) x height (210mm)

3、主要組成工作原理及結構特點：

3. Main components, working principles, and structural characteristics:

（1）本機由機體、工作臺、滑動板、氣動系統、電控盤、傳動滾輪等主要組成部分。

(1) This machine consists of the main components such as the body, worktable, sliding plate, pneumatic system, electric control panel, and transmission roller.

（2）工作原理

(2) Working principle

由開齒刀的運轉帶動型材的走動，以達到開齒穿條效果。

The movement of the profile is driven by the operation of the toothed cutter to achieve the effect of toothed threading.

（3）結構特點

(3) Structural characteristics

本機是在吸收國內外同類產品優點的基礎上開發的新機型，采用氣、電聯合操作控制，上下調節滾輪，適用于加工不同端面形狀和尺寸的型材。

This machine is a new model developed on the basis of absorbing the advantages of similar products at home and abroad. It adopts a combined operation control of gas and electricity, adjusts the rollers up and down, and is suitable for processing profiles with different end shapes and sizes.

4、生產工藝流程

4. Production process flow

（1）開齒：將型材上要插入熱條的槽口部分開齒打毛，以增加隔熱條與型材槽口復合時的咬合效果，這道路工序是高復合型材抗剪切力的關鍵，通過使用硬質打磨輪，在專用設備上將槽口部分開齒打毛。

(1) Teeth opening: The part of the groove on the profile where the hot strip is to be inserted is toothed and roughened to increase the interlocking effect between the insulation strip and the groove of the profile. This process is the key to the high shear resistance of the composite profile. By using a hard grinding wheel and specialized equipment, the toothed part of the groove is roughened.

（2）穿條：將隔熱條穿入需要復合的內外兩根鋁型材的相應槽口內，利用穿條設備，確保隔熱條準確地插入兩根鋁型材的已開齒的槽口內，為下一工序進行滾壓，提供準確位置，并大大提高生產率。

(2) Strip threading: Thread the insulation strip into the corresponding slots of the inner and outer aluminum profiles that need to be composite. Use strip threading equipment to ensure that the insulation strip is accurately inserted into the already toothed slots of the two aluminum profiles, providing accurate positioning for rolling in the next process and greatly improving productivity.

5,本機打牙刀下面的兩組滾動輪可以各自實現上下左右的任意調節，在異形型材打牙時方便調整，有利于均勻打牙，這也是區別于普通開齒穿條一體機的地方。

5. The two sets of rolling wheels under the toothed cutter of this machine can be adjusted up, down, left, right, and left respectively. It is convenient to adjust during the toothed process of irregular profiles, which is conducive to uniform toothed cutting. This is also the difference from ordinary toothed threading integrated machines.

6，本機可以實現貼膜-打牙-穿條一次完成。

6. This machine can achieve one-time completion of film application, tooth punching, and strip threading.